 |
 |
 |
 |
Presenting the newly updated Two-Notes Torpedo C.A.B. M+ Pedalboard Amp and Cabinet Simulator.
The C.A.B. M+ is a stompbox-format miked cab simulator (DynIR Technology), clean preamp, dual-IR loader, reverb, noise-gate, equaliser and tuner for home, live and studio use. It comes with a lifetime license for Torpedo Wall of Sound and 32 DynIR Cabinets.
C.A.B. M+ features:
- High-end cab sim with DynIR Virtual Cabinets and Dual-IR Loader
- Perfect pedal platform with a clean preamp and 8 power amps
- XLR output to plug your pedalboard straight to a Console, Powered Speaker, or Recording Interface
- Studio-grade EQ, Enhancer, Reverb and Room Acoustics simulation
Dynamic IR technology Fed up with lifting heavy cabinets and inconsistent sound from room to room? Go direct to the PA and/or audio interface with studio grade Virtual Cabinet simulations. Don’t settle for static IRs when Dynamic IRs (DynIR) offer (almost) endless tone options such as placing different microphones in front and behind the cabinet or moving the microphones on or off axis.
Effortlessly control the micing chain Shape your tone on the hardware, or connect Torpedo C.A.B. M+ to your computer (Torpedo Remote USB) or pair with your phone or tablet via Wireless Torpedo Remote (iOS / Android). No other cab sim offers such universal control of the miking chain and with dual miking available on every cabinet, you may never use a real mic again.
DI your amp Not only is the CAB M+ your ultimate pedal platform, you can place the compact hardware between your favorite amp and speaker to ensure you get the full experience of your amp tone direct to the mixer or audio interface. Two notes Virtual Cabinets deliver your tone directly, and flawlessly, to FOH or your DAW. Moreover, if you connect the speaker out of the C.A.B. M+ to a reactive load box (such as the Two notes Captor 4 / 8/ 16), you can create the perfect ‘silent stage’.
Explore a legendary backline of speaker cabinets and microphones With 32 Virtual Cabinets in the unit and over 350 available in the Two notes library (including official Mesa Boogie™, and many others), guitarists no longer have to compromise with a handful of static third-party IRs embedded within their cab sim pedal.
The ultimate pedal platform Guitar pedals have come a long way in the last 25 years and you may use them to define your tone. With the new clean preamp and a choice of 8 power amps, the Torpedo C.A.B. M becomes the perfect pedal platform. Place the Torpedo C.A.B. M+ at the end of your chain and go direct to the PA / interface – the silence in your playing environment will be golden, but your tone will still be roaring where it matters the most.
The perfect IR loader If you have regular (static) IRs that are firm favorites in your library and you want them on your pedal board; you can store up to 512 on the (included) memory card, blend two effortlessly with Two notes technology and define your tone. The powerful onboard DSP handles all processing for both Two notes Virtual Cabinets and Static IRs with minimum latency. With a maximum IR length of 200ms, your tone will hit you without any audible delay.
Introducing clean preamp tones from Torpedo C.A.B. M+
Torpedo C.A.B. M + Tones with Jamie Humphries
Input / Output Amp/Inst/Line Input: 1/4″ Jack balanced (TRS) In Level Switch*: +12dB: Max level: 4 dBu, Impedance: 1 MOhms 0dB: Max level: 16 dBu, Impedance: 57 kOhms -24dB: Max level: 40 dBu, Impedance: 47 kOhms *Affects input sensitivity and impedance
Aux In: 1/8″ (3.5mm) TRS Jack, Downmixed to mono Speaker output*: 1/4″ Jack balanced (TS) *Unprocessed, unbuffered, directly connected to Amp In DI output*: XLR balanced Max level: 10 dBu Impedance: 300 Ohms *Protected against +48V phantom power
Line output: 1/4″ Jack balanced (TRS) Max level: 10 dBu Impedance: 300 Ohms
Headphones output: 1/8″ Mini-Jack (TRS) USB connector: USB 2.0 Micro-B Memory card: 256Mb Micro-SD included Up to 32Gb cards supported Digital Audio AD/DA Converters: Studio-grade 24-bit / 96 kHz Bandwidth (-1dB): 30 Hz – 19 kHz Signal-to-noise ratio: 91 dB Internal Processing: 32-bit floating-point Latency: 2.2 ms (Line Input to Line Output)
Power Power input connector: DC connector, 2.1mm x 5.5mm, center negative Supplied adapter: 100-240v AC to 12v DC 1A Power consumption: Approximately 2W Current consumption: 200mA
Dimensions & weight Width x Depth x Height*: 12.1cm x 10cm x 6cm – 4.8″ x 4″ x 2.4″ *Including connectors and knobs Weight: 450 g / 0.99 lbs
We are open Tuesday-Saturday from 10am until 6pm CDT. Any order placed before 3pm CDT Tuesday through Saturday is processed for shipment the same day. Orders placed Sunday-Monday will be processed for shipment the following Tuesday. For Free Shipping items, Effects pedals and small goods items are generally shipped via USPS Priority Mail, and Guitars and Amplifiers are generally shipped via UPS Ground. Due to our central location in the middle of the US, most orders will be delivered within 1-3 days delivery time. Other shipping methods are available (at an additional cost), including next day air.
Please call us directly at (972)540-6420 if you have any questions regarding shipping for your order.
|
|
 |
 |
 |
 |
|
 |

|