Designed and Handcrafted in Petaluma, California, USA
Passive Design – No Power Supply Required
Built-In Internal Amp Load FOR AMPS RATED 150-WATTS OR LESS (auto-activates when no cable is
connected to “Thru” Output)
¼” “Input” Jack (receives signal from amps speaker output)
¼” “Thru” Output Jack (defeats to Internal Load when no cable is connected)
3-Position Cabinet Voicing Switch - Open-Back, Closed-Back & Vintage Closed-Back Cabinet Simulations
Variable -30 to +4db DI Output Level Control with presets for Dynamic Mic Level (-30db), Instrument
Level (-10db) & Line Level (+4db)
Balanced XLR Direct Output (controlled by the Variable DI Output Level Control)
Independent ¼” +4 Line Level “Slave” Output Jack (exact signal from amp’s speaker output, non-
simulated)
Compensated Headphone Output Jack (defeats balanced outputs when used)
Phase Switch – Normal (In) or Reverse (180°)
Ground Lift Switch
Removable Tilt-Back Stand (for use over an amp handle)
Dimensions (W/D/H): 6.7" x 6.40" x 2.30" without tilt-back stand (3.30” with tilt back stand)
170.18mm x 162.56mm x 58.42mm without tilt-back stand (83.82” with tilt back stand)
Weight: 2.4lbs (1.09Kg) WITH Tilt-Back Stand/ 2.3lbs (1.04Kg) WITHOUT Tilt-Back Stand