Home > Pedals & Accessories > Effects Pedals > Shop by Brand > Free The Tone >

Free The Tone RJ-2V Red Jasper Overdrive

Free The Tone RJ-2V Red Jasper Overdrive


 
Alternative Views:


Got Questions? Call Us (972)540-6420

Our Price: $245.45

Quantity in Stock:6

Availability: Orders Placed Tues-Sat before 3pm Ship the Same Day
Qty:

Description

Specifications

Shipping Information

 
Presenting the new Free The Tone RJ-2V Red Jasper Overdrive Pedal.

The Original RJ-1V RED JASPER won popularity as FREE THE TONE’s first low gain drive pedal, but was unfortunately discontinued in 2018 because some of its component parts became difficult to obtain.

Now, after three years, the RED JASPER has come back. Again the RED JASPER “RJ-2V” features a sound resembling that of vintage tube amps, namely, smooth highs, punchy mids, full but tight lows, and natural and pleasing compression feel. We carefully examined and selected every component to refine the sound of this product.

In general the sonic output of an overdrive unit in the lower registers varies with its gain setting and the type of guitar or amp/cabinet used. There would be many occasions where you wish to correct an excess or deficiency of the lower register components. The RJ-2V newly adds a mode switch to select from four modes of different low frequency characteristics (cut-off frequencies). With this you can adjust the lower register output to suit the characteristics of your guitar/amplifier.

In addition the RED JASPER has a HI-CUT tone circuit to adjust higher registers. Free the Tone adopted a passive circuit with minimum phase error in the guitar signal to attain high-fidelity amplification, to get natural tone, and to keep guitar’s original timbre. This circuit provides a natural change like the tone control on a guitar and turning the knob counterclockwise cuts highs gently. From a subtle whispering tone to a powerful and persistent drive sound, it can output your guitar sound expressively.

The Red Jasper Features:
  • Carefully chosen high reliability components.
  • Passive type tone circuit (hi-cut) to minimize phase error in guitar signal.
  • Mode switch to select low end frequency characteristics from four settings.
  • Astoundingly excellent signal-to-noise ratio.
  • FREE THE TONE’s original HTS (Holistic Tonal Solution) circuit is implemented. Unlike conventional buffer circuits, the HTS circuit attains both “sound” and “low noise”
  • by performing impedance conversion while fully bringing out sound characteristics of the guitar. The HTS circuit prevents degradation of guitar timbre even when the effect is turned off.



Mode selector switch settings
The low end of the bass range is gradually cut from setting A to setting D:
  • Setting A SW1: ON / SW2: ON
  • Setting B SW1: ON / SW2: OFF
  • Setting C SW1: OFF / SW2: ON (* Left figure: Factory default setting)
  • Setting D SW1: OFF / SW2: OFF
Free The Tone / Red Jasper RJ-2V
FREE THE TONE / RED JASPER RJ-2V OVERDRIVE Demo by Shinichi Ubukata

Share your knowledge of this product with other customers... Be the first to write a review